COLLECT CHUCK
- Front push design achieves high axial positioning accuracy.
- Quick-release front cover design allows quick removal of the Spring Collet.
| Model | Spindle Nose | Thru-Hole mm | Sleeve Stroke mm | Max. Push Force kN(kgf) | |
|---|---|---|---|---|---|
| CC-30 | A4 | A2-4 | 30 | 5 | 20(2039) |
| CC-42 | A5 A6 | A2-5 A2-6 | 42 | 7 | 25(2549) |
| CC-52 | A6 | A2-6 | 52 | 7 | 27.4(2800) |
| CC-60 | A6 | A2-6 | 60 | 7 | 30(3059) |
| Model | Max. Chucking Force kN(kgf) | Max. Speed r/min | Weight kg | Matching Collect | |
|---|---|---|---|---|---|
| CC-30 | A4 | 44(4486) | 7000 | 4.2 | 163E |
| CC-42 | A5 A6 | 55(5608) | 6000 | 6.5 8 | 173E |
| CC-52 | A6 | 59(6020) | 6000 | 9.4 | 177E |
| CC-60 | A6 | 65(6628) | 5000 | 11.9 | 185E |
| Chucking Range | mm | |||
|---|---|---|---|---|
| Model | Round | Hexagon | Square | |
| Max. | Min. | |||
| 163E | 30 | 3 | 4-25 | 5～20 |
| 173E | 42 | 3 | 6-35 | 6〜29 |
| 177E | 52 | 3 | 6-44 | 6～36 |
| 185E | 60 | 3 | 8-51 | 7～2 |
| The usd spring collet must comply with specification of DIN6343 | ||||
Model | A | B | C | D | E | F | G | H | I | J | K | L | N | O | P | Q | R | S | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| max. | min. | |||||||||||||||||||
| CC-30 | A4 | M40x1.5 | 45 | 63.5 | 82.6 | 112 | 3-M10x35 | 85 | 15 | 30 | 28 | 23 | 6 | 109 | M50x1.5 | 60 | 120 | 14.68x6.5 | 63 | 5.2 |
CC-42 | A5 | M60x2.0 | 60 | 82.55 | 104.8 | 135 | 4-M10x30 | 100 | 20 | 27 | 37 | 30 | 8.5 | 133 | M66x1.5 | 30 | 90 | 16.28x6.5 | 77 | 5.2 |
| A6 | 63 | 106.36 | 133.4 | 170 | 4-M12x30 | 22 | 28 | 38 | 31 | 134 | 19.46x6.5 | |||||||||
| CC-52 | A6 | M60x2.0 | 70 | 106.36 | 133.4 | 170 | 4-M12X40 | 110 | 15 | 34.4 | 37 | 30 | 8.5 | 133 | M70X1.5 | 30 | 90 | 19.46x6.5 | 95 | 5.2 |
| CC-60 | A6 | M74x2.0 | 88 | 106.36 | 133.4 | 170 | 4-M12x30 | 130 | 15 | 27 | 37 | 30 | 8.5 | 149 | M90x1.5 | 30 | 90 | 19.46x6.5 | 97 | 5.2 |
