HIGH PRECISION CNC LATHE FUL-15/20/25/30/36/38

HIGH PRECISION CNC LATHE FUL-15/20/25/30/36/38

Gantry loading & unloading system(Opt.)

MODEL		UNIT	FUL-15	FUL-20		FUL-25			FUL-30			FUL-36			FUL-38
MODEL		UNIT	FUL-1503	FUL-2004	FUL-2007	FUL-2504	FUL-2507	FUL-2512	FUL-3007	FUL-3012	FUL-3022	FUL-3607	FUL-3612	FUL-3622	FUL-3807	FUL-3812	FUL-3822
Capacity	No. of axis		2 axis	2 axis / opt. 3 axis (C axis)		2 axis / opt. 3 axis (C axis)			2 axis / opt. 3 axis (C axis)			2 axis / opt. 3 axis (C axis)			2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	Ø460 (18.11")	Ø460 (18.11")		Ø600 (23.62")			Ø630 (24.8")			Ø770 (30.3")			0840 (33”)
	Swing over saddle	mm (in)	Ø275 (10.8")	Ø275 (10.8")		Ø450(17.7")			Ø440 (17.3")			Ø590 (23.22")			0670 (26.37*)
	Max, turning dia.	mm (in)	Ø280 (11.02")	Ø280 (11.02")		Ø316(12.44”)			Ø450 (17.72")			Ø570 (22.44")			0670 (26.37*)
	Working length	mm (in)	300 (11.8")	455 (17.9")	690 (27.16")	435 (17.12")	690 (27.16")	1290 (50.78")	700 (27.55")	1300 ( 51.18")	2200 ( 86.6")	600 (23.6")	1200 (47.2")	2100 (82.7")	600 (23.6”)	1200 (47.2")	2100 (82.7")
	Gulde way	type	LINEAR	LINEAR/BOX		LINEAR/BOX			LINEAR/BOX		BOX	BOX			BOX
Spindle	Spindle nose	ISO	A2-5	A2-6		A2-6			A2-8			A2-8/opt.:A2-11			A2-8/選配:A2-11
	Spindle bore	mm (in)	Ø56 (2.2")	Ø61 (2.4")		Ø77 (3.03")			Ø90(3.54")/opt.:Ø101(3.97")			Ø101(3.97")/opt.:Ø131(5.15)			Ø101(3.97")/opt.:Ø131(5.15")
	Bar capacity	mm (in)	Ø45 (1.77")	Ø52 (2")		Ø65 (2.56")			Ø77(3.08")/opt.:Ø91(3.58")			Ø91(3.58")/opt.:Ø117(4.6")			Ø91(3.58")/opt.:Ø117(4.6")
	Range of spindle speed	rpm	6000 rpm	4200		3500			3500/opt.:2500			2500/opt.:2000			2500/opt.:2000
	Living tools speed (opt.)	rpm	NONE	4000	4000	4000	4000	4000	4000			4000			4000
Chuck	Hydraulic chuck	mm (in)	Ø169 (6")	Ø210 (8")		Ø254 (10")			Ø254(10")/opt.:Ø304(12")			Ø304(12")/opt.:Ø381(15")			Ø304(12")/opt.:Ø381(15")
Turret	Tool station (Random)	station	8T	8T (Opt.: servo turret / power turret)		12T / (Opt.: servo turret/ power turret)			12T / (Opt.: servo turret/ power turret)			12T / (Opt.: servo turret/ power turret)			12T / (Opt.: servo turret/ power turret)
	O.D, tooling	mm (in)	□25x25	□25x25		□25x25			□ 25x25			□32x32			□ 32 X 32
	I.D tooling	mm (in)	Ø32 (1.25")	Ø32 (1.25")		Ø40(1.5")			Ø40 (1.5")			Ø50 (2”)			Ø50 (2”)
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	160 (140+20) (6.3")	165 (140+25) (6.49")		185 (158+27) (7.28")			250 (225+25) (9.84")			315 (285+30) (12.4")			365 (335+30) (14.4")
	Z-axis travel	mm (in)	340 (13.3")	490 (19.3")	740 (29.13")	490 (19.3")	740 (29.13")	1340 (52.75")	740 (29.1")	1340 (52.75")	2240 (88.19")	660 (26")	1260 (49.6")	2160 (85")	660 (26")	1260 (49.6")	2160(85”)
	Rapid traverse speed (X-axis)	m/min	30	30 (LINEAR) / 24 (BOX)		30 (LINEAR) / 24 (BOX)			30 (LINEAR) / 24 (BOX)		24(BOX)	24			24
	Rapid travers speed (Z-axls)	m/min	30	30 (LINEAR) / 20 (BOX)		30 (LINEAR) / 20 (BOX)			30 (LINEAR) / 20 (BOX)		12(BOX)	20	20	12	20	20	12
	Cutting feed rate (Both-axls)	mm/rev	0.001-500	0.001-500		0.001-500			0.001-500			0.001-500			0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø32(1.26") P10	Ø32 (1.26") P10		Ø32 (1.26") P10			Ø32 (1.26") P10			Ø36 (1.42") P10			Ø36(1.42”)P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø36(1.42") P10	Ø36 (1.42") P10		Ø36 (1.42") P10		Ø40 (1.57") P10	Ø36 (1.42") P10	Ø40 (1.57") P10	Ø50 (1.97") P10	Ø40 (1.57") P10	Ø40 (1.57") P10	Ø50 (1.97") P10	Ø40 (1.57") P10	Ø40 (1.57") P10	Ø50 (1.97") P10
	Spindle	kW	β6il (5.5/7.5)	βP18i (9/11)		βP22i (11/15)			βP30i (15/18.5)			αP40i (18.5/22)			α22i(22/26) + 2-SPEED GEARBOX
Motor	X-axis	kW	β8Bis (1.2)	β12Bis (1.8)		β12Bis (1.8)			β22Bis (2.5)			α22BI (4)			α22Bi (4)
	Z-axis	kW	β8is (1.2)	β12is (1.8)		β12is (1.8)			β22Bis (2.5)			α22l (4)			α22i (4)
	Hydraulic oil pump	kW(HP)	1.5 (2)	1.5 (2)		1.5 (2)			1.5 (2)			1.5(2)			15 (2)
	Coolant pump	W(HP)	750 (1)	750⑴		750⑴			750(1)			750⑴			750(1)
Tailstock	Quill dia.	mm (in)	Ø75(2.95")(OP.)	Ø75 (2.95")		Ø75 (2.95")			Ø90 (3.54")			100(3.94")			100 (3.94")
	Quill stroke	mm (in)	85(3.35")(OP.)	85 (3.35")		85 (3.35")			100 (3.94")			100(3.94")			100 (3.94")
	Taper of center		MT no.4(OP.)	MT no.4		MT no.4			MT no.5			MT no.5			MT no.5
	Tailstock travel	mm (in)	240(9.44")(OP.)	415(163")	660 (26")	380(14.96")	630 (24.8")	1230 (48.42")	650 (25.6")	1250 (49.2")	2150 (84.65")	595 (23.4")	1195 (47.04")	2095 (82.48")	595 (23.4")	1195 (47.04")	2095 (82.48")
Tank Capacity	Hydraulic Tank	Liter	40	40	60	60			60			60			60
	Coolant tank	Liter	110	115	180	190	250	300	250	330	420	280	375	520	280	375	520
	Length * width	mm	1850 x 1600	2440 x 1600	2900x 1600	2600x1845	2900 x 1845	3800 x 1845	3100x1845	3770x1845	4800x 184S	3100 x 1945	3770x1945	5000x1945	3350x 1945	4020x 1945	5050 x 1945
Dimensions	Height	mm (in)	1737 (68.4")	1737(68.4")		2050 (80.7")			2050 (80.7")			2100(82.67")			2100 (82.67")
Dimensions	Welght (NW/GW)	kgs	3600 /4050	4500 / 5050	5100/5460	5000 / 5300	5600/ 5960	6500 / 7000	5600 / 5870	6500 / 7000	8300/9100	6600/6870	7500/8000	8400/ 9300	7200 / 7470	8100/8600	9000 / 9900

STANDARD ACCESSORIES	OPTIONAL ACCESSORIES
3 bar-750w coolant pump Coolant tank Hydraulic turret 8-position / 12-Position Automatic lubrication system Tools & tool box Working light Three color alarm light Hydraulic unit Heat exchanger for electric cabinet Chip conveyor and bucket	Programmable tailstock	C.E. electric control Automatic tool setter C axis and TD axis contour capability Main power transformer Automatic door & safety switch Larger hydraulic chuck Servo turret Manual tailstock Automatic parts catcher Prevent crash install of each	axis (safety equipment) Bar feeder Parts cut off detector Larger spindle motor

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

3 bar-750w coolant pump

Coolant tank

Hydraulic turret 8-position / 12-Position

Automatic lubrication system

Tools & tool box

Working light

Three color alarm light

Hydraulic unit

Heat exchanger for electric cabinet

Chip conveyor and bucket

Programmable tailstock

C.E. electric control

Automatic tool setter

C axis and TD axis contour capability

Main power transformer

Automatic door & safety switch

Larger hydraulic chuck

Servo turret

Manual tailstock

Automatic parts catcher

Prevent crash install of each

axis (safety equipment)

Bar feeder Parts cut off detector

Larger spindle motor

MODEL		UNIT	FUL-15
MODEL		UNIT	FUL-1503
Capacity	No. of axis		2 axis
	Swing over bed	mm (in)	Ø460 (18.11")
	Swing over saddle	mm (in)	Ø275 (10.8")
	Max, turning dia.	mm (in)	Ø280 (11.02")
	Working length	mm (in)	300 (11.8")
	Gulde way	type	LINEAR
Spindle	Spindle nose	ISO	A2-5
	Spindle bore	mm (in)	Ø56 (2.2")
	Bar capacity	mm (in)	Ø45 (1.77")
	Range of spindle speed	rpm	6000 rpm
	Living tools speed (opt.)	rpm	NONE
Chuck	Hydraulic chuck	mm (in)	Ø169 (6")
Turret	Tool station (Random)	station	8T
	O.D, tooling	mm (in)	□25x25
	I.D tooling	mm (in)	Ø32 (1.25")
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	160 (140+20) (6.3")
	Z-axis travel	mm (in)	340 (13.3")
	Rapid traverse speed (X-axis)	m/min	30
	Rapid travers speed (Z-axls)	m/min	30
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø32(1.26") P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø36(1.42") P10
	Spindle	kW	β6il (5.5/7.5)
Motor	X-axis	kW	β8Bis (1.2)
	Z-axis	kW	β8is (1.2)
	Hydraulic oil pump	kW(HP)	1.5 (2)
	Coolant pump	W(HP)	750 (1)
Tailstock	Quill dia.	mm (in)	Ø75(2.95")(OP.)
	Quill stroke	mm (in)	85(3.35")(OP.)
	Taper of center		MT no.4(OP.)
	Tailstock travel	mm (in)	240(9.44")(OP.)
Tank Capacity	Hydraulic Tank	Liter	40
	Coolant tank	Liter	110
	Length * width	mm	1850 x 1600
Dimensions	Height	mm (in)	1737 (68.4")
Dimensions	Welght (NW/GW)	kgs	3600 /4050

MODEL		UNIT	FUL-20
MODEL		UNIT	FUL-2004	FUL-2007
Capacity	No. of axis		2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	Ø460 (18.11")
	Swing over saddle	mm (in)	Ø275 (10.8")
	Max, turning dia.	mm (in)	Ø280 (11.02")
	Working length	mm (in)	455 (17.9")	690 (27.16")
	Gulde way	type	LINEAR/BOX
Spindle	Spindle nose	ISO	A2-6
	Spindle bore	mm (in)	Ø61 (2.4")
	Bar capacity	mm (in)	Ø52 (2")
	Range of spindle speed	rpm	4200
	Living tools speed (opt.)	rpm	4000	4000
Chuck	Hydraulic chuck	mm (in)	Ø210 (8")
Turret	Tool station (Random)	station	8T (Opt.: servo turret / power turret)
	O.D, tooling	mm (in)	□25x25
	I.D tooling	mm (in)	Ø32 (1.25")
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	165 (140+25) (6.49")
	Z-axis travel	mm (in)	490 (19.3")	740 (29.13")
	Rapid traverse speed (X-axis)	m/min	30 (LINEAR) / 24 (BOX)
	Rapid travers speed (Z-axls)	m/min	30 (LINEAR) / 20 (BOX)
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø32 (1.26") P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø36 (1.42") P10
	Spindle	kW	βP18i (9/11)
Motor	X-axis	kW	β12Bis (1.8)
	Z-axis	kW	β12is (1.8)
	Hydraulic oil pump	kW(HP)	1.5 (2)
	Coolant pump	W(HP)	750⑴
Tailstock	Quill dia.	mm (in)	Ø75 (2.95")
	Quill stroke	mm (in)	85 (3.35")
	Taper of center		MT no.4
	Tailstock travel	mm (in)	415(163")	660 (26")
Tank Capacity	Hydraulic Tank	Liter	40	60
	Coolant tank	Liter	115	180
	Length * width	mm	2440 x 1600	2900x 1600
Dimensions	Height	mm (in)	1737(68.4")
Dimensions	Welght (NW/GW)	kgs	4500 / 5050	5100/5460

MODEL		UNIT	FUL-25
MODEL		UNIT	FUL-2504	FUL-2507	FUL-2512
Capacity	No. of axis		2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	Ø600 (23.62")
	Swing over saddle	mm (in)	Ø450(17.7")
	Max, turning dia.	mm (in)	Ø316(12.44”)
	Working length	mm (in)	435 (17.12")	690 (27.16")	1290 (50.78")
	Gulde way	type	LINEAR/BOX
Spindle	Spindle nose	ISO	A2-6
	Spindle bore	mm (in)	Ø77 (3.03")
	Bar capacity	mm (in)	Ø65 (2.56")
	Range of spindle speed	rpm	3500
	Living tools speed (opt.)	rpm	4000	4000	4000
Chuck	Hydraulic chuck	mm (in)	Ø254 (10")
Turret	Tool station (Random)	station	12T / (Opt.: servo turret/ power turret)
	O.D, tooling	mm (in)	□25x25
	I.D tooling	mm (in)	Ø40(1.5")
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	185 (158+27) (7.28")
	Z-axis travel	mm (in)	490 (19.3")	740 (29.13")	1340 (52.75")
	Rapid traverse speed (X-axis)	m/min	30 (LINEAR) / 24 (BOX)
	Rapid travers speed (Z-axls)	m/min	30 (LINEAR) / 20 (BOX)
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø32 (1.26") P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø36 (1.42") P10		Ø40 (1.57") P10
	Spindle	kW	βP22i (11/15)
Motor	X-axis	kW	β12Bis (1.8)
	Z-axis	kW	β12is (1.8)
	Hydraulic oil pump	kW(HP)	1.5 (2)
	Coolant pump	W(HP)	750⑴
Tailstock	Quill dia.	mm (in)	Ø75 (2.95")
	Quill stroke	mm (in)	85 (3.35")
	Taper of center		MT no.4
	Tailstock travel	mm (in)	380(14.96")	630 (24.8")	1230 (48.42")
Tank Capacity	Hydraulic Tank	Liter	60
	Coolant tank	Liter	190	250	300
	Length * width	mm	2600x1845	2900 x 1845	3800 x 1845
Dimensions	Height	mm (in)	2050 (80.7")
Dimensions	Welght (NW/GW)	kgs	5000 / 5300	5600/ 5960	6500 / 7000

MODEL		UNIT	FUL-30
MODEL		UNIT	FUL-3007	FUL-3012	FUL-3022
Capacity	No. of axis		2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	Ø630 (24.8")
	Swing over saddle	mm (in)	Ø440 (17.3")
	Max, turning dia.	mm (in)	Ø450 (17.72")
	Working length	mm (in)	700 (27.55")	1300 ( 51.18")	2200 ( 86.6")
	Gulde way	type	LINEAR/BOX		BOX
Spindle	Spindle nose	ISO	A2-8
	Spindle bore	mm (in)	Ø90(3.54")/opt.:Ø101(3.97")
	Bar capacity	mm (in)	Ø77(3.08")/opt.:Ø91(3.58")
	Range of spindle speed	rpm	3500/opt.:2500
	Living tools speed (opt.)	rpm	4000
Chuck	Hydraulic chuck	mm (in)	Ø254(10")/opt.:Ø304(12")
Turret	Tool station (Random)	station	12T / (Opt.: servo turret/ power turret)
	O.D, tooling	mm (in)	□ 25x25
	I.D tooling	mm (in)	Ø40 (1.5")
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	250 (225+25) (9.84")
	Z-axis travel	mm (in)	740 (29.1")	1340 (52.75")	2240 (88.19")
	Rapid traverse speed (X-axis)	m/min	30 (LINEAR) / 24 (BOX)		24(BOX)
	Rapid travers speed (Z-axls)	m/min	30 (LINEAR) / 20 (BOX)		12(BOX)
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø32 (1.26") P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø36 (1.42") P10	Ø40 (1.57") P10	Ø50 (1.97") P10
	Spindle	kW	βP30i (15/18.5)
Motor	X-axis	kW	β22Bis (2.5)
	Z-axis	kW	β22Bis (2.5)
	Hydraulic oil pump	kW(HP)	1.5 (2)
	Coolant pump	W(HP)	750(1)
Tailstock	Quill dia.	mm (in)	Ø90 (3.54")
	Quill stroke	mm (in)	100 (3.94")
	Taper of center		MT no.5
	Tailstock travel	mm (in)	650 (25.6")	1250 (49.2")	2150 (84.65")
Tank Capacity	Hydraulic Tank	Liter	60
	Coolant tank	Liter	250	330	420
	Length * width	mm	3100x1845	3770x1845	4800x 184S
Dimensions	Height	mm (in)	2050 (80.7")
Dimensions	Welght (NW/GW)	kgs	5600 / 5870	6500 / 7000	8300/9100

MODEL		UNIT	FUL-36
MODEL		UNIT	FUL-3607	FUL-3612	FUL-3622
Capacity	No. of axis		2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	Ø770 (30.3")
	Swing over saddle	mm (in)	Ø590 (23.22")
	Max, turning dia.	mm (in)	Ø570 (22.44")
	Working length	mm (in)	600 (23.6")	1200 (47.2")	2100 (82.7")
	Gulde way	type	BOX
Spindle	Spindle nose	ISO	A2-8/opt.:A2-11
	Spindle bore	mm (in)	Ø101(3.97")/opt.:Ø131(5.15)
	Bar capacity	mm (in)	Ø91(3.58")/opt.:Ø117(4.6")
	Range of spindle speed	rpm	2500/opt.:2000
	Living tools speed (opt.)	rpm	4000
Chuck	Hydraulic chuck	mm (in)	Ø304(12")/opt.:Ø381(15")
Turret	Tool station (Random)	station	12T / (Opt.: servo turret/ power turret)
	O.D, tooling	mm (in)	□32x32
	I.D tooling	mm (in)	Ø50 (2”)
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	315 (285+30) (12.4")
	Z-axis travel	mm (in)	660 (26")	1260 (49.6")	2160 (85")
	Rapid traverse speed (X-axis)	m/min	24
	Rapid travers speed (Z-axls)	m/min	20	20	12
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø36 (1.42") P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø40 (1.57") P10	Ø40 (1.57") P10	Ø50 (1.97") P10
	Spindle	kW	αP40i (18.5/22)
Motor	X-axis	kW	α22BI (4)
	Z-axis	kW	α22l (4)
	Hydraulic oil pump	kW(HP)	1.5(2)
	Coolant pump	W(HP)	750⑴
Tailstock	Quill dia.	mm (in)	100(3.94")
	Quill stroke	mm (in)	100(3.94")
	Taper of center		MT no.5
	Tailstock travel	mm (in)	595 (23.4")	1195 (47.04")	2095 (82.48")
Tank Capacity	Hydraulic Tank	Liter	60
	Coolant tank	Liter	280	375	520
	Length * width	mm	3100 x 1945	3770x1945	5000x1945
Dimensions	Height	mm (in)	2100(82.67")
Dimensions	Welght (NW/GW)	kgs	6600/6870	7500/8000	8400/ 9300

MODEL		UNIT	FUL-38
MODEL		UNIT	FUL-3807	FUL-3812	FUL-3822
Capacity	No. of axis		2 axis / opt. 3 axis (C axis)
	Swing over bed	mm (in)	0840 (33”)
	Swing over saddle	mm (in)	0670 (26.37*)
	Max, turning dia.	mm (in)	0670 (26.37*)
	Working length	mm (in)	600 (23.6”)	1200 (47.2")	2100 (82.7")
	Gulde way	type	BOX
Spindle	Spindle nose	ISO	A2-8/選配:A2-11
	Spindle bore	mm (in)	Ø101(3.97")/opt.:Ø131(5.15")
	Bar capacity	mm (in)	Ø91(3.58")/opt.:Ø117(4.6")
	Range of spindle speed	rpm	2500/opt.:2000
	Living tools speed (opt.)	rpm	4000
Chuck	Hydraulic chuck	mm (in)	Ø304(12")/opt.:Ø381(15")
Turret	Tool station (Random)	station	12T / (Opt.: servo turret/ power turret)
	O.D, tooling	mm (in)	□ 32 X 32
	I.D tooling	mm (in)	Ø50 (2”)
Cross slide (X-axis)& Carriage (Z-axis)	X-axis travel	mm (in)	365 (335+30) (14.4")
	Z-axis travel	mm (in)	660 (26")	1260 (49.6")	2160(85”)
	Rapid traverse speed (X-axis)	m/min	24
	Rapid travers speed (Z-axls)	m/min	20	20	12
	Cutting feed rate (Both-axls)	mm/rev	0.001-500
	Dia. of ball screw (x-axis)	mm/rev	Ø36(1.42”)P10
	Dia. of ball screw (Z-axls)	mm (in)	Ø40 (1.57") P10	Ø40 (1.57") P10	Ø50 (1.97") P10
	Spindle	kW	α22i(22/26) + 2-SPEED GEARBOX
Motor	X-axis	kW	α22Bi (4)
	Z-axis	kW	α22i (4)
	Hydraulic oil pump	kW(HP)	15 (2)
	Coolant pump	W(HP)	750(1)
Tailstock	Quill dia.	mm (in)	100 (3.94")
	Quill stroke	mm (in)	100 (3.94")
	Taper of center		MT no.5
	Tailstock travel	mm (in)	595 (23.4")	1195 (47.04")	2095 (82.48")
Tank Capacity	Hydraulic Tank	Liter	60
	Coolant tank	Liter	280	375	520
	Length * width	mm	3350x 1945	4020x 1945	5050 x 1945
Dimensions	Height	mm (in)	2100 (82.67")
Dimensions	Welght (NW/GW)	kgs	7200 / 7470	8100/8600	9000 / 9900

HIGH PRECISION CNC LATHE FUL-15/20/25/30/36/38

SPECIFICATIONS

MACHINE FEATURES

FUL-15

FUL-20

FUL-25

FUL-30

FUL-36

FUL-38